Call 405-381-4373 Click
here to new site www.bestbuymetalproducts.com
This is a 18 ft X 20 ft long on what's called 5 ft legs. The
low side is approx. 6 ft tall with the peak being 9 ft. It can be placed on
ground that is within 4 or 5 inches of being level. This unit can be enclosed on all
4 sides with a 3 or 4 foot walk thru door or a garage roll up door. To
place a garage door on this or any other unit, it must have a minimum of 6 feet
legs with some companies needing 7 Ft legs. Corner braces come standard
only with units from True-bilt Outdoor Products in Okla.. See options and sizes below.
|
Add for leg height 5 ft is standard height on
regular style unit. Actual sides are about 1 ft taller than the leg
height. A-Frame comes standard with 6 ft legs, but that is the actual
height. On legs over 7 ft, we recommend adding Power-Bars Click for
Picture. They add a lot to the overall structural integrity of the
building. |
Units can be ordered longer than 36 feet
by using multiple units and placing them end to end and overlapping the
metal sheets on the roof. You can over-lap the units, but you loose a few
feet in length by doing so. Installing units on anything other than concrete, we
recommend adding a pier system after unit has been installed. Our sales staff
can explain
Prices are subject to change and must be approved by installing
yard
disclaimer
and policy