All prices include installation in any of the states we service
numbers shown represent width by length. Units longer than 36 ft length can be achieved by placing 2 units "end-to-end" extra charge applies. You can figure any size building using these prices. Print off page for ease! 26 gauge sheet metal is also available in some areas. Also, 40 ft long units are available in some states. Click here for 30 wide pricing Call 405-381-4373 Click here to new site www.bestbuymetalproducts.com
12 x 20 = $695 12 x 24 = $895 12 x 28 = $1095 12 x 32 = $1595 12 x 36 = $1395
18 x 20 = $795 18 x 24 = $995 18 x 28 = $1195 18 x 32 = $1395 18 x 36 = $1495
20 x 20 = $995 20 x 24 = $1295 20 x 28 = $1495 20 x 32 = $1695 20 x 36 = $1795
22 x 20 = $1195 22 x 24 = $1495 22 x 28 = $1795 22 x 32 = $1995 22 x 36 = $2095
24 x 20 = $1395 24 x 24 = $1795 24 x 28 = $1995 24 x 32 = $2195 24 x 36 = $2395

Add for leg height  5 ft is standard height on regular style unit. Actual sides are about 1 ft taller than the leg height. A-Frame and 30 wide comes standard with 6 ft legs, but that is the actual height. On legs over 7 ft, we recommend adding Power-Bars (standard on 30 wide) Click for Picture. They add a lot to the overall structural integrity of the building.
20  ft long
6 ft  $45
7ft   $85
8ft   $125
9ft   $185
10ft  $225
11ft $265
12   $305		 24  ft long
$50
$100
$150
$220
$270
$325
$375		 28  ft long
$60
$115
$170
$245
$300
$355
$425		 32  ft long
$65
$125
$185
$265
$325
$390
$450		 36 ft long
$75
$145
$215
$305
$375
$445
$510

Close both sides 
5 ft    $300
6ft     $345
7ft     $390
8ft     $435
9ft     $480
10ft   $525
11ft   $
12 ft  $		 $375
$425
$475
$525
$575
$625
$
$		 $450
$505
$560
$615
$670
$725
$
$		 $510
$570
$630
$690
$750
$810
$
$		 $595
$660
$725
$790
$855
$920
$
$

Close one end (double for front and back)
12 wide
5 ft    $400
6 ft    $440
7 ft    $460
8 ft    $510
9 ft    $550
10 ft  $590
11 ft  $
12 ft  $		 18 wide
$415
$470
$525
$580
$635
$690
$
$		 20 wide
$490
$550
$610
$670
$730
$790
$
$		 22 wide
$565
$630
$695
$760
$825
$890
$
$		 24 wide
$650
$720
$780
$850
$920
$990
$
$

Power bars Recommended for anything taller than 7 ft (adds a lot more structure integrity)
20 ft   $100 24 ft    $115 28 ft   $130 32 ft   $145 36 ft   $160

Partial Gable 
12 wide  $115 18 wide   $120 20 wide    $125 22 wide  $125 24 wide   $125

Roll up
door sizes available (width x height)

Walk through doors available
4 ft door $195
8 X 6     $280
8 x 7      $285
8 X 8    $335
8 X 9    $340
8 X 10  $360
9 X 6    $300
9X7      $310		 9X8     $350
9X9     $360
9X10   $385
10X6   $310
10X7   $335
10X8   $360
10X9   $385
10X10 $410

extra metal
20 ft    $75
24 ft      $95
28 ft   $115
32 ft   $135
36 ft    $150
40ft    $150

additional bow braces 24 " = $15 per bow

window sizes available
30 inches wide by 40 inches tall $125

J-Trim $10 to $12 per stick

Units can be ordered longer than 36 feet by using multiple units and placing them end to end and overlapping the metal sheets on the roof. You loose 1 foot due to the overlapping.
example: using (2) 20 x 24  units end to end will achieve an overall length of 47 feet in length. If installed on anything other than concrete slab, this Dealer recommends adding concrete piers after the installation. Our sales staff can explain.

Prices are subject to change and must be approved by installing yard.

 

 

 

 

 

 

 

 

disclaimer and policy